Eachine Falcon 210 CC3D F3 FPV Racer RTF With OSD 700 TVL Camera 5.8G 40CH VTX
- Description: I6 User Manual
- Item Specification Features
- Falcon 210 Frame Dimension: 200 x 165 x 60mm
- Package : 420 x 270 x 105mm
- Weigh: 353g (no battery prop)
- Take off Weigh: 535g
- Package Weigh: 1.4kg
- Compatible with 4-5 inch propeller
- Compatible with 2204 motor
- Can be used with 4S/3S battery
- With Seft-protection function
- With direction indicator LED
- Inclined motor base design, fast speed
- Removable protection motor base
- ESC Model: Fairy-20A
- Continuous Current: 20A
- Instantaneous Current(10S): 30A
- BEC: No
- Li-Po Battery: 2-4S
- Weight: 7G
- Size(without plug): 28 x 15 x 6mm Motor Shaft Lock Protection
- (don’t use the other programe, or the funtion will be damaged)
- Support OneShot 125
- Adopt powerful high performance MCU
- Smaller size and lighter
- Special for multirotor, more sensitive during flying
- Strong adaptive ability
- Support the refresh rate of throttle siginal up to 500Hz,
- compatible with multi flight controller
- (notice:>=500Hz is nonstandard throttle siginal)
- Prevent locked rotor protection
- Motor KV:2300
- MAX Thrust:440G Length: 32.2MM
- NO.OF Cell:2-4S Diameter: 27.9MM
- Framework: 12N14P Shaft:3MM
- Propeller:5-6 inch Weight: 25G
- Flight
- Controller CC3D / SP Racing F3
- Battery 3S 11.1V 1500mAh 35C Battery ,XT60 plug
- 700TVL Cam Power supply: 3.6-5.5V (powered off TX)
- Power consumption: 60mA @5V
- Imager: 1/3” CMOS, more than 700TVL
- Angle: 127° diagonal FOV, 110° horizontal FOV
- FPV tuned light handling
- NTSC or PAL (selectable; jumper on = PAL).
- Lens: 2.6mm IR coated
- FOV: 127°diagonal 110°horizontal (ideal for fixed camera)
- Operation Temperature: -20 to 70°C
- Square: 32 X 32 X 23.5mm
- Lens extrude (LxDia): 15mm X 14mm
- Weight: 12g
- FT200 VTX Modulate: Wideband FM Modulate
- Video Format: NTSC/PAL
- Output Impedance: 50 Ohm
- Output Power: 23-24dBm
- Channel: 40 CH
- Operating Voltage: 7V-24V
- Supply Current: 190mA
- Operating Temperature: -10~85 Video Band Width : 0~8.0 MHz
- Audio Carrier Frequency: 6.5 MHz
- Video Input Level: 0.8~1.2 Vp-p
- Video Input Impedance: 75 Ohm
- Audio Input Level: 0.5~2.0 Vp-p
- Audio Input Impedance: 10K Ohm
- Transmitting distance : ~300m (open area)
- LED indicators for Fr/Ch
- Connector: RP-SMA Female
- Antenna : RP-SMA Male,LHCP
- Dimension: 38mm x 22.5mm x 6mm
- Weight: 6g (without antenna)

Leave a Reply
You must be logged in to post a comment.