Upgraded FlySky FS-TH9X Transmitter FS-R9B RM002 Mode 2
FlySky FS-TH9X 2.4G 9CH Transmitter Mode 2 Description:
- 2.4G System: AFHDS
- Band: 160
- Bandwidth: 500Hz
- Brand Name: FlySky
- Channels: 9 Channels
- Charger Port: yes
- Code Type: PPM/PCM
- Control Range: 350-400m
- DSC Port: yes(3.5mm:output:PPM)
- Item Name: FS-TH9X 2.4G 9CH Transmitter
- LCD Backlight: No
- LCD Type: 128 x 64 dot
- Low Voltage Warning: yes(less than 9V)
- Mode: Mode 2
- Model Memory: 30
- Model Type: quadcopter,glider, helicopter, airplane, also car or boat
- Modulation: GFSK
- Power: 12VDC or 8 x 1.5AA
- RF Power: less than 20DB
- RF Range: 2.40-2.48GHz
- Senditivity: 1024
- Size: 180 x 220 x 70 mm
- Weight: 670g
FlySky FS-TH9X 2.4G 9CH Transmitter Mode 2 The transmitter functions:
- Dual rate
- Elevons
- Endpoint adjustments
- Exponential
- Flaperons
- Pitch curves
- Servo reversing
- Subtrim
- Swash AFR mixes
- Throttle curves
- Timer
- V-Tail mixing
FlySky FS-TH9X 2.4G 9CH Transmitter Mode 2 Receiver:
- 2.4G Mode: Automatic FM digital system
- Antenna Length: 26mm
- Certificate: CE,FCC
- Channel Resolution: 1024 classes
- Channels: 8 Channels
- Color: Grey
- Frequency Range: 2.4-2.48GHz
- Frequency Width: 500KHz
- Modulation: GFSK
- Power: 4.0-6.55V DC
- Product Number: FS-R9B
- Receiving Sensitivity: -105dBm
- Size: 52*35*15mm
- Wave Band: 160
- Weight: 18g
How to bind the RX (receiver) to the TX (transmitter):
1. Plug bind plug into BAT, turn on plane/heli, the LED light should flash (make sure power is connected to RX via ESC)
2. Hold down bind button on transmitter module while turning on the TX
3. The light should go steady now
4. Let go of bind button, turn off plane/heli, remove bind plug, turn off TX
5. Turn on TX and then turn on plane/heli
Leave a Reply
You must be logged in to post a comment.