Holybro Shuriken X1 200MM F3 FPV Racer with 600TVL Camera BNF

Holybro Shuriken X1 Features

  • Full 3K Carbon Fiber
  • BetaFlight Pre-loaded
  • Nickel-plated 12.9 screws
  • High quality spiroNet antenna
  • Easy grip black anodized spacers
  • S.bus, DSMX, or PPM Receivers Compatible
  • Intergrated MWOSD (firmware V1.5 preloaded)
  • Included TPU GoPro Session mount. HD Camera angle 35°
  • 1/3 SONY Super HAD II CCD, PAL, 600TVL Camera, 2.5mm Lens
  • 3-colour LED board included controlled by LED Trip signal
  • 5.8GHz, 200/600mw switchable, 40 Channel Vtx with built in push button switching and channel display
  • Two mounting positions for the FPV Camera: one for a 0°~40° view angle, a second mounting position for 35°~70° view angle
  • FC;OSD;PDB;VTX and voltage/current sensor are all integrated in one PCB which makes an integral structure with a much lower barycentre

Holybro Shuriken X1 Specs

  • Input voltage 7v to 42v
  • 2305-2600kv Motors (T-MOTOR)
  • Weight: About 370g without battery
  • PCB Maximum Continuous Current 120A
  • FTDI Cable Compatible Pinout(minim OSD)
  • Filtered voltage output – output 5.2v 2A
  • ATmega328P with Arduino Bootloader(minim OSD)
  • MAX7456 Monochrome On-Screen Display(minim OSD)
  • OneShot125 BLheli S 30A / 40A burst BLHeli ESC’s
  • Compact size for 5″ propellers, 200mm motor to motor
  • Flight Controller : 32-bit F3 Flight Controller , MPU6050 Gyro/Accelerometer

Holybro Shuriken X1 Price

  • Last updated Holybro Shuriken X1 price at Banggood: US$282.31

Necessary Part(not included):

  • Battery
  • Remote Control Transmitter

Package Included: (Battery,Remote Control Transmitter are not included)

  • 4 x ESC
  • 4 x ESC
  • 1 x PDB
  • 4 x 2305 Motor
  • 1 x Receiver
  • 1 x 40CH VTX
  • 1 x 600TVL Cam
  • 1 x Shuriken X1
  • 2 x Battery strap
  • 1 x Flight Contoller
  • 8 x 5 Inch Propeller
  • 1 x 5.8G 4 leaf antenna
  • 1 x Gopro session protector (TPU 3D Print)

Leave a Reply