Holybro Shuriken X1 Features
- Full 3K Carbon Fiber
- BetaFlight Pre-loaded
- Nickel-plated 12.9 screws
- High quality spiroNet antenna
- Easy grip black anodized spacers
- S.bus, DSMX, or PPM Receivers Compatible
- Intergrated MWOSD (firmware V1.5 preloaded)
- Included TPU GoPro Session mount. HD Camera angle 35°
- 1/3 SONY Super HAD II CCD, PAL, 600TVL Camera, 2.5mm Lens
- 3-colour LED board included controlled by LED Trip signal
- 5.8GHz, 200/600mw switchable, 40 Channel Vtx with built in push button switching and channel display
- Two mounting positions for the FPV Camera: one for a 0°~40° view angle, a second mounting position for 35°~70° view angle
- FC;OSD;PDB;VTX and voltage/current sensor are all integrated in one PCB which makes an integral structure with a much lower barycentre
Holybro Shuriken X1 Specs
- Input voltage 7v to 42v
- 2305-2600kv Motors (T-MOTOR)
- Weight: About 370g without battery
- PCB Maximum Continuous Current 120A
- FTDI Cable Compatible Pinout(minim OSD)
- Filtered voltage output – output 5.2v 2A
- ATmega328P with Arduino Bootloader(minim OSD)
- MAX7456 Monochrome On-Screen Display(minim OSD)
- OneShot125 BLheli S 30A / 40A burst BLHeli ESC’s
- Compact size for 5″ propellers, 200mm motor to motor
- Flight Controller : 32-bit F3 Flight Controller , MPU6050 Gyro/Accelerometer
Holybro Shuriken X1 Price
- Last updated Holybro Shuriken X1 price at Banggood: US$282.31
Necessary Part(not included):
- Battery
- Remote Control Transmitter
Package Included: (Battery,Remote Control Transmitter are not included)
- 4 x ESC
- 4 x ESC
- 1 x PDB
- 4 x 2305 Motor
- 1 x Receiver
- 1 x 40CH VTX
- 1 x 600TVL Cam
- 1 x Shuriken X1
- 2 x Battery strap
- 1 x Flight Contoller
- 8 x 5 Inch Propeller
- 1 x 5.8G 4 leaf antenna
- 1 x Gopro session protector (TPU 3D Print)
Leave a Reply
You must be logged in to post a comment.