Description
Diffirence:
1. Propellers are upgraded into HQ 40mm 4-Blade Propeller
2. FPV Camera is upgraed into Runcam Split 3 Nano 1080P HD Camera
Specification:
Brand Name: iFlight
Model: Cinebee 75HD Plus
Item Name: 75mm F4 FPV Racing Drone w/ Runcam Split 3 Nano HD Camera
Drone Wheelbase: 75mm
Bottom & Top Plate Thickness: 1mm
Inner Standoff Height: 22mm
Protective Guard Diameter: 42mm ( Outer 45mm)
Camera Mounting Width: 19mm
Build Weight: 63.1g
Flight Time: above 3min.
SucceX Micro 16x16mm Stack
– F4 OSD Flight Controller |
Brand Name: iFlight Model: SucceX Micro F4 Item Name: F4 OSD Flight Controller -STM32F411
-Input Voltage 2-4S LIPO
-Gyroscope: MPU6000
-2x UART ports
-4x motor outputs
-Built-in OSD
-No Blackbox FLASH
-BEC 5V 2A cont.
BF target: MATEKF411 -Size: 21x21mm
-Mounting Hole: 16x16mm
-Weight: 2.5g
|
SucceX Micro 16x16mm Stack
– 12A BLheli_S 4in1 ESC |
Brand Name: iFlight Model: SucceX Micro 12A Item Name: 12A BLheli_S 4in1 ESC Firmware: Blheli_S
Input Voltage: 2-4S LIPO
Continuous Current: 12A
MCU: BB21F16G
BEC: None
ESC protocol: PWM, oneshot125, multishot, dshot150, 300, 600, etc.
Size: 23mm*21mm
Mounting hole 16*16mm
Weight: 2.7g
|
SucceX Micro 16x16mm Stack
– 5.8G 48CH PIT/25/100/200mW VTX |
Brand Name: iFlight
Model: SucceX Micro VTX Power : PIT/25/100/200mW Antenna interface: IPEX (UFL)
Telemetry: IRC Tramp
Size: 17mm*27mm
Mounting holes: 16*16mm
Weight: 1.6g
|
iFlight 1103 10000KV Motor |
Brand Name: iFlight
Item Name: 1103 10000KV 2-3S Brushless Motor
KV: 10000KV
Configu-tation: 9N12P
No.of Cells(Lipo): 2-3S
Stator Length: 5.5mm
Shaft Diameter: 1.5mm
Top screws size: 5mm
Screw hole at the bottom of the motor: 8.5mm diagonal
Motor Dimension(Dia.*Len): 13.6×10.2mm
Weight: 3.5g
|
HQ 40mm 1.6 Inch 4-Blade Propeller | Item Name: HQ 40mm 1.6 Inch 4-Blade Propeller Quantity: 2 CW & 2 CCW Color: Black -HQ for video recording, JELLOFREE, better throttle management, NOT crash resistant |
Runcam Split 3 Nano 1080P HD Camera | Brand Name: Runcam Model: Split 3 Nano Color: Black
Field of View(FOV) : Recording FOV: 165°; FPV FOV: 165°@16:9, 130°@4:3
Video Resolution: 1080@60fps / 1080@50fps / 1080@30fps / 720@60fps
Video File Format: MOV
Image Resolution: 2 MP
TV Mode: NTSC (720*480) / PAL (720*576) Switchable
Interface: JST 1.25mm / UART
Max Micro SD Card Supported: 64G(need Class 6 or above,
Recommend Class 10 / UHS-I / UHS-II / UHS-III) Hole Distance of Installation: 20*20mm
Dimensions: PCB 29*29mm / Lens Module 14*14mm
Power Input: DC 5-20V(Non-direct power supply from battery.
Powered direcly with battery will generate surges and burn the camera.) Working Current: 650mA @5V / 270mA @12V
Weight: 10.5g
|
Receiver ( Optional Version) | PNP Version: Without Receiver – Flysky FS-A8S V2 Receiver – DSM2/ DSMX Receiver – Frsky R-XSR Receiver – Frsky XM+ Receiver |
Recommend Lipo Battery ( All Version are NOT Included) |
Recommend 2S 420mAh Lipo Battery |
Package Included:
1x iFlight Cinebee 75HD FPV Racing Drone
2x Battery Strap
1x set of Propeller Protective Guard (White)
1x XT30U Male Connector
1x IPEX (UFL) Antenna
2x Protective Tube for Antenna
FrSky R-XSR Receiver(+US$10.00)/Frsky XM+ Receiver/
Reviews
There are no reviews yet.