20x20mm Holybro Kakute F7 Mini V3 Flight Controller & Tekko32 F3 45A Mini BL_32 4in1 ESC Combo for RC Drone FPV Racing

$132.53

SKU: RC1449247 Category:

Upgrade the KAKUTE F7 Mini Flight Controller to KAKUTE F7 Mini V3 Version
1. Main Chip change from F745 to F722 now. Main function is same.
2. Add Connection Port for DJI FPV& Caddx Vista VTX
Aug. 5th, 2020
Specication
Brand Name:Holybro
Model:KAKUTE F7 Mini V3
Item Name:F7 2-6S Flight Controller & Tekko32 F3 45A Mini BL_32 4in1 ESC Combo
KAKUTE F7 V3 Mini Flight Controller ( Manual)
MCU:STM32F722RET6 32-bit processor,216MHz, 256Kbytes Flash
IMU:MPU6000 (SPI)
Barometer:BMP280
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
5 hardware UARTS (UART1,2,3,4,6,7)
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
PPM and PWM receivers are not supported.
Onbord 16Mbytes for Blackbox logging
5V Power Out:1.0A max
3.3V Power Out:0.2A max
Dimensions:30x30mm
Mounting Holes:Standard 20mm square to center of holes
Weight:4g
Tekko32 F3 45A Mini ESC
F3 MCU, runs double faster than F051
32bit ESC with BLHELI32 firmware
Supports 3-6S lipo input
PWM input, TLM supported
Voltage output (VBAT)
NO BEC
Supports oneshot / Multishot / Dshot PWM
Supports damped light
Ext. cap needed for 6s (1000uf 35v for 6s usage.)
Mounting holes M3, 20x20mm
Size:30 x 38 mm
Weight:7.6g
Packag Included
1x F7 Flight Controller Board
1x Tekko32 F3 4in1 45A mini ESC
1x M2 Rubber rings
1x JST SH 8pin 30mm cable
1x JST SH 8pin 150mm cable1x Electrolytic capacito:1000uF 35V
1x 8pin to 8pin 1mm pitch 65mm cable
1x 8pin to 8pin 1mm pitch 25mm cable

Weight 0.06 kg

Reviews

There are no reviews yet.

Be the first to review “20x20mm Holybro Kakute F7 Mini V3 Flight Controller & Tekko32 F3 45A Mini BL_32 4in1 ESC Combo for RC Drone FPV Racing”