30.5×30.5mm MAMBA F405 MK3 F4 Flight Controller 40A BLHeli_S 3-6S CH40 8Bit DSHOT600 Brushless ESC for RC Drone FPV Racing

$99.21

SKU: RC1810969 Category:

Specifications
Item Name:MAMBAF405 MK3 Flight Controller 40A MK2 6S 8Bit ESC Stack
Flight Controller
MAMBA F405 MK3
MCU:168MHz STM32F405RGT6
GYRO:MPU6000
Barometer:Yes
OSD:Yes
Blacbox:16M Flash Memory
Uarts:6Set
ESC Soft:Dshot300/600
ESC Telemetry:Yes
Power Led:Yes
LED Controller:BF LED/MB LED(4 Set 2812 LED)
S. F.Port:Yes
RSSI:Yes
Buzz:Yes
Input:3~6S Lipo (12.6~25.2V)
TVS Protection:Yes
BEC:3.3V 0.5A& 5V 3A (System Power)&
5V 3A(LED)& 9V 3A
MOUNTING:30.5mm,M3
ESC
MAMBA F40 40A Blheli_S
INPUT VOLTAGE:3~6S Lipo (12.6V~25.2V)
CONTINUE CURRENT:40A*4
BURST CURRENT:50A (10S)
BEC:No
Target:BLHeli_S CH40
SOFT:Dshot300/600
TVS Protection:Yes
MOUNTING:30.5mm/M3
Features
Fixed
1. Add I2C function
2. When you connect the USB, the receiver and OSD settings can be saved
3. Increase the pad area
4. LED signal selection (when Mamba Led sys avaiable)
5. BEC short circuit protection
6. TVS instant high voltage protection 30V
Update
1. F405 models support F.prot(Most)
2. Upgrade the anti-interference cable
3. Use Typec(Most)
4. The pad area of Mini flight controller (20*20) increased by 140%
Added
1. Add self-recovery insurance to the receiver’s 5V power supply
2. Increase the camera VCC power supply pad
3. Standard flight controller (30.5*30.5) adds spare pad
4. Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference
Package Included
1 x MAMBA STACK F405 MK3 40A 6S 8BIT Stack
1 x High Frequency 470uF/35V
2 x 8pin sh1.0
2 x 12AWG 100mm
AMASS Original XT60

Weight 0.097 kg

Reviews

There are no reviews yet.

Be the first to review “30.5×30.5mm MAMBA F405 MK3 F4 Flight Controller 40A BLHeli_S 3-6S CH40 8Bit DSHOT600 Brushless ESC for RC Drone FPV Racing”