CUAV V5 NANO Flight Controller for PX4 PIX FPV Drone Multi-rotors VTOL UAV Fixed Wing

$286.14

SKU: RC1521642 Category:

Specifications
Hardware Parameters
– Main FMU Processor:STM32F765(32-bit, 216MHz, 2MB flash, 512KB RAM)
Features
– Compact but powerful V5 nano flight controller + NEO GPS
– Support for hardware on open source platform PX4 and Autopilot
– Suitable for fixed-wing drones, helicopters, multicopters, FPVs, VTOL, Unmanned Boats, UAVs
– High Performance:Equipped with STM32F765 microprocessor, features 216MHz main frequency, 2M flash and 512K SDRAM. There are four groups of isolation chips and a MS5611 high-precision air gauge.
– Easy to install and dismantle with 2.6mm spacing between IO pins.
– Real-time Data Monitor:Five groups of built-in sensors enhance its safety and stable performance. There are ICM-20689 accelerometer and gyroscope, ICM-20602 accelerometer and gyroscope, BMI055 accelerometer and gyroscope, IST8310 magnetic compass and MS5611 air gauge.
Sensors
– Accelerometer:ICM-20602/ICM-20689/BMI055
– Gyroscope:ICM-20602/ICM-20689/BMI055
– Magnetometer:IST8310
– Air Gauge:MS5611
Interfaces
– UART Ports:5
– I2C Ports:4
– PWM Output:Up to 11
– PWM Input:4
– Signal Input Protocol for Remote Control:PPM/SBUS/DSM
– RC IN:1
– PPM IN:1
– RSSI Input:PWM or 3.3V analog voltage
– CAN Standard Bus:2
– Current & Voltage Input:1
– Safety Switch:1
– GPS Port:1
– Debug Port:1
– JATG Port:1
– USB Port:1 (Type-C)
Supported Models
– For PX4 Hardware:Fixed-wing Aircrafts, 3-8 Multicopters, Helicopters, VTOL, UAVs, Unmanned Boats
Working Conditions & Physical Parameters
– PM Working Voltage:4.5 to 5.5V
– USB Voltage:5V±0.25V
– Servo Input:0 to 36V
– Working Temperature:-40 to 85℃
Weight & Dimensions
– Dimensions:40 x 60 x 17.5mm
– Weight:40g
Package Included
– 1 x V5 nano Flight Controller
– 2 x Dupont Cables
– 1 x ADC6.6 Cable
– 2 x I2C/CAN Cables
– 1 x SBUS Signal Cable
– 1 x RSSI Cable
– 1 x DSM Signal Cable
– 1 x ADC3.3 Cable
– 1 x Debug Cable
– 1 x Safety Switch + Cable
– 1 x Voltage Current Cable
– 1 x PW-Link Module + Cable
– 1 x Power Suppl Module
– 1 x 16GB Memory Card
– 1 x I2C Expansion Board
– 1 x TTL Board

Weight 0.278 kg

Reviews

There are no reviews yet.

Be the first to review “CUAV V5 NANO Flight Controller for PX4 PIX FPV Drone Multi-rotors VTOL UAV Fixed Wing”