ImmersionRC Ghost tto 2.4Ghz Adaptive FHSS 4MS Latency OpenTX integration OTA Receiver for RC Drone

$51.96

SKU: RC1782523 Category:

Size matters. The Ghost átto receiver weighs in at about 0.6g, and is only 14.8 x 11.5mm, a 15% smaller footprint than its closest competitor.
Most standard protocols are supported, including PWM, SBus, Fast SBus (200k), SRXL-2 (400k) and an inverted SBus (or rather an inverted-inverted SBus) to increase flexibility with F4 FCs.
Deja-Vu binding ensures that receivers already ‘known’ by a Ghost transmitter (through a previous bind operation) no longer require a button press to bind them. This also goes for new receivers, which will bind for the first time without the need for the button (all of this because we can’t stand tearing models open to find that buried bind button).
Description
Brand:ImmersionRC
Downlink RF Power:+13dBm
Sensitivity:-117dBm in Long Range mode
Serial Formats:SBus, SBus-Fast (200k) , SRXL-2 (400k), GHST, SBus Inverted
Firmware:Over-the-air (OTA) upgradable
Power Supply:5V recommended, as low as 3.3V tolerated
vTx Control:Tramp control from ‘T’ pin on Rx, regardless of selected serial format
Dimensions:14.8mm x 11.5mm, 0.6g (w/o antenna)
Rx Noise Floor Analysis:Auto on power-up, or on demand from the Tx
Features
2.4GHz ISM Band
‘JR’ Compatible Transmitter with Diversity Transmission
One Of The Smallest Receivers On the Market
Chirp Spread Spectrum, with Adaptive FHSS
Crazy Race Performance, 222.22Hz updates
~4ms End to End Latency, with OpenTx Integration
More range than most pilots will ever need
Orqa Goggle Integration
That space on the FPV.Connect board… yeah, that is for a Ghost receiver, the átto.
Ghost transmitters and receivers can form a network, without the need to use bluetooth or wifi, and communicate between themselves without sacrificing critical control performance.
Clear channel scan with automatic channel assignment, auto-start DVR recording when throttle stick is raised, and a bunch of other cool features planned for 2020.
Proton Packs for Days
Simple PCBs designed to dramatically simplify wiring, mounting, and cooling of Tramp Nano + Ghost combinations.
36×36 single-sided, 20×20 double sided, 20×20 single sided, ‘Toothpick style’, and a special version designed for the Five33 Tiny Trainer.
qTee Antennas
qTee, a.k.a ‘Cutie’ antennas are center-fed dipoles, with integral balun to ensure no cable radiation, and without unexpected nulls in the radiation pattern.
Tip to Tip length of just 60mm, easy to install in anything from a Whoop to an X-Class quad
Systems Integrators/Manufacturers
ImmersionRC is open to discuss with manufacturers who wish to embed Ghost into other systems (Hobby, Industrial, Law Enforcement, etc.). An embedded Ghost 2.4GHz Rx occupies approx. 10mm x 10mm of PCB space.
For use on sub-GHz bands, the ‘Red Ghost’ product line can be custom ordered for use on licensed bands from 140MHz to 1GHz.
GPS + Noise
Another advantage of running 2.4GHz instead of the more traditional sub-GHz frequencies for long range is that 2.4GHz has no harmonics that can desensitize GPS receivers (which are in the 1.5GHz band), so GPS position fixes become more precise.
In addition, Drone/Quad/UAV electrical noise due to fast switching signals is broadband, and also sub-GHz (typically sub-500MHz), and doesn’t desensitize the 2.4GHz Ghost receiver.
Package Included
1x Atto Receiver
1x qTee Antenna
Silicone Cables
Heat Shrink

Weight 0.01 kg

Reviews

There are no reviews yet.

Be the first to review “ImmersionRC Ghost tto 2.4Ghz Adaptive FHSS 4MS Latency OpenTX integration OTA Receiver for RC Drone”