iFlight iH2 HD 2inch 120mm Wheelbase 4S Whoop BNF w/Caddx Vista Digital HD System FPV Racing RC Drone


Receiver PNP / Receiver FrSky R-XSR Receiver / Receiver TBS Crossfire Nano RX /

SKU: RC1673763 Category:

Size Conversion
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Please be aware that the TBS Crossfire nano RX Drones might delay to be shipped, depending on the RX back time. We will try to ship every one order as soon as possible.Thanks.
126.5 grams without battery
Butter smooth XING-E 1204
Duct prop guards to protect the sensitive environment or yourself
Pre-tuned with smooth freestyle settings
iH2 HD BNF Specs
SucceX-E mini F4 + mini 35A stack
Motor:XING-E 1204 4500KV
Body size:100*68mm
Bottom plate thickness:2.5mm
Top plate thickness:1.5mm
Top and bottom plate spacing:22mm (aluminum column height 25mm)
Ducted propeller size:2 inch
Maximum propeller size without ducts:2.5 inch props
FC pattern:20*20mm,16*16mm
FPV cam spacing:19mm
Weight:126.5g (without battery)
Flight time:5-6 min cruising
iH2 HD Quad BNF Included Components and Parts
Prebuilt and tested Quadcopter (With 4 Ducts)
1x iH2 HD Frame
1x Caddx Vista Digital HD System Kit
1x TPU Antenna holder
2x TPU camera side plate soft mount
2x Emax 2 inch / 2.5 inch 3-blades (Set of 4 – Color May Vary)
1x iFlight Lipo Strap
FC // SucceX-E Mini F4
– MCU:168MHz STM32F405
– Gyro:MPU6000
– Blackbox:8MB
– Betaflight OSD:YES
– BEC:5V 2.5A
– Uarts:5
– ESC Telemetry:yes
– INA Pad:nuart2
– Input voltage:2-6S
– Size:25*25mm /20*20mm φ3 mounting
– Weight:4g
– Mounting hole:20*20mm,φ3mm
– Size:25*25mm
ESC // SucceX-E Mini 35A
Top Features
– 6 layers double-sided PCB board
– 2oz 1.4mm thick power board
– MLCC Low ESR ceramic capacitors
– Top grade 2R203 MOSFET
Current Sensor:Yes
Input:2-6S LIPO
Constant:35A / Burst:40A
Supports up to Dshot600, Proshot, Oneshot, Multishot
BLHeliSuite download:http://www.mediafire.com/file/1tn449x6815upat/BLHeliSuite16714901.zip/file
Mounting pattern:20*20, φ3mm with Grommets φ2mm
Dimensions:31*30mm (including the power pads)
Additional Suggested Parts
DJI HD FPV Goggles
Radio Controller
DJI Remote Controller (Mode 2)
Battery 4S 450mAh
The DJI Remote Controller is recommended for beginners since you won’t need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don’t choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter and then bind to your own radio as usual.

Weight 0.5 kg


There are no reviews yet.

Be the first to review “iFlight iH2 HD 2inch 120mm Wheelbase 4S Whoop BNF w/Caddx Vista Digital HD System FPV Racing RC Drone”