Happymodel Cine8 DIY 85mm 3S Crazybee F4 V3.1 12A ESC 2 inch Brushless CineWhoop FPV Racing Drone BNF w/ 5.8G 40CH 400mW VTX Caddx ANT 1200TVL Camera

SKU: RC1797285

$171.59

Receiver Compatible Frsky Receiver / Receiver Flysky Fli14+ Receiver / Receiver DSMX / DSM2 Receiver / Receiver TBS Crossfire Nano RX /

Dispatch:Usually will be shipped in 24 hours
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Shipping Fast to Chat with us online to see if the product is in stock before order:
WhatsApp us

Notice
It is DIY FPV Racing Drone.
You need assemble all parts by yourself.
Introduction
This Kit is very easy to build , no solder work any more, just assemble then plug and play .
Very cheap but equipped with high-performance and stable components.
The frame is formed by high-precision TPU 3D printing, fixed with carbon fiber board and the use of integral foam to prevent collision.
Every one could enjoy the fun of building their own FPV Cinewhoop.
Specification
Brand Name:Happymodel
Model:Cine8
Item Name:DIY 85mm F4 3S Brushless CineWhoop FPV Racing Drone BNF
Wheelbase:85mm
Size:145x140x23mm
Weight:73g (without battery)
Weight:99g (with Insta360, NOT Included in package)
EX1202.5 8000KV Motor:Model:EX1202.5
Item Name:1202.5 8000KV 2-3 Brushless Motor
No.of Cells:2-3S Lipo
Configu-ration:9N12P
Stator Diamter:12mm
Stator Length:2.5mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ14×14.5mm
Weight:4.4g
Gemfan D51 2020 4-Blade Propeller:Material:PC
Weight:0.91g
Pitch:2in
Props Dia:50.3mm
Center Thickness:4.5mm
Center Hole Dia:1.5mm 3 holes
CRAZYBEE F4 V3.1 Flight Controller:Frsky SPI RX version) CRAZYBEEF4 V3.1 FC Firmware target:CrazybeeF4FR
(External Flysky Fli14+ RX version) CRAZYBEEF4 V3.1 FC Firmware target:CrazybeeF4FR
(External Speki+ RX version) CRAZYBEEF4 V3.1 FC Firmware target:CrazybeeF4FR
(External TBS CRSF NANO version) CRAZYBEEF4 V3.1 FC Firmware target:CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor:MPU-6000(SPI connection)
Board Size:28.5×28.5mm
Power Supply:2-4S Battery input (DC 7V-17V)
Built-in Betaflight OSD(SPI Control)
Built-in 5V 1A BEC
Onboard 12A 4in1 ESC:MCU Upgraded to EFM8BB21
Power Supply:2-4S LiPo/LiPo HV (7v/17v)
Con. Current:12A
Burst Current:15A (5 seconds)
Support BLHeliSuite programmable
Factory firmware:F_H_40_REV16_8.HEX
Default protocol:DSHOT600
Onboard Frsky SPI D8 Receiver Version:CC2500 Hardware
Compatible with FrskyD FrskyX Frsky_X_LBT SFHSS REDPINE protocol
Channels:8ch
Failsafe support
Diversity 2.4G receiver system
No ground interference:above 300meter
External Flysky Fli14+ Receiver:Channel:14
Protocol:AFHDS-2A
2.4G Mode:The second generation of an enhanced version of the automatic FM digital system
Antenna Length:50mm (single antenna)
Input Power:4.0-6.5V DC
Weight:Only 1g
Size:19.5mm*12mm*5mm
Color:Black
Signal Output:IBUS
RSSI Output:Channel14
No ground interference:>500m
External DSMX/2 Receiver:Dimension:20×12.4x5mm
Support protocol:DSM2/DSMX
Output Signal configuration:SRXL(Set Spektrum2048/SRXL for the serial receiver provider)
Antenna connector:I-PEX MHF3
Antenna length:70mm
Input voltage:3.6v~13v
Input current:100ma
Channels:Max12ch(usually channel 12 is used for RSSI)
External TBS CRSF Nano Receiver :Original TBS CROSSFIRE Receiver, CRSF Protocol, Official TBS transmitter compatible
5.8G 40CH 400mw VTX:Output power:25mw~400mw switchable
Frequency:40CH
Input voltage:3.3V 5.5V
Current consumption:400mA(type)
Frequency:5.8GHz 5bands 40 channels
With Race band
SmartAudio ready
Caddx ANT 1200TVL Camera:Image Sensor:1/3′ CMOS Sensor
Horizontal Resolution:1200 TVL
TV System:NTSC or PAL
IMAGE:16:9 or 4:3
Synchronization:Internal
Electronic Shutter:PAL:1/50~100,000; NTSC:1/60~100,000
S/N Ratio :>52dB (AGC OFF)
Video Output:CVBS
Lens:1.8mm
Min. Illumination:0.001Lux@F1.2
Auto Gain Control:YES
BLC:YES
WDR:Global WDR
DNR:3D DNR
Dimensions:14*14mm(with bracket to 19*19mm)
Wide Power Input:DC 3.7-18V
Work Temperature:-20℃~+60℃
Weight:2g (N.W.)
Lipo Battery:Tattu 3S 11.4V 450mAh Lipo Battery
Features
– No Solder work need and easy to build
– Very reliable and resistant to drops
– Stable and smooth flying
– Insta360 fixed mount ready ( insta360 camera not included)
– Smooth and powerful
Package Included
1x Cine8 85mm Frame
1x Optional Receiver
4x EX1202.5 8000KV Motor
2x Gemfan D51 2020 4-Blade Propeller CW
2x Gemfan D51 2020 4-Blade Propeller CCW
1x Caddx ANT 1200TVL Camera
1x 5.8G 400mW VTX
1x TypeC USB Adapter
1x Tattu 3S 11.4V 450mAh Lipo Battery

Weight 0.2 kg

Reviews

There are no reviews yet.

Be the first to review “Happymodel Cine8 DIY 85mm 3S Crazybee F4 V3.1 12A ESC 2 inch Brushless CineWhoop FPV Racing Drone BNF w/ 5.8G 40CH 400mW VTX Caddx ANT 1200TVL Camera”

Customers Also Viewed