URUAV UZ85 85mm 2S DIY Whoop FPV Racing Drone PNP/BNF Caddx ANT Lite Cam AIO 4IN1 CrazybeeX FC 1102 10000KV Motor 5A ESC

SKU: RC1741531


Receiver Internal SPI Frsky Receiver / Receiver Internal SPI Flysky Receiver / Receiver Without Receiver /

Dispatch:Usually will be shipped in 24 hours
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Shipping Fast to Chat with us online to see if the product is in stock before order:
WhatsApp us

1. This is the DIY version that comes unassembled.
2. It comes without battery and charger.
Brand Name:URUAV
Item Name:UZ85
Weight:36g(without battery)
Compatible Battery:2S 300mAh/350mAh/450mAh/520mAh
Motor:Mode:1102 10000KV
Stator Diamter:11mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
No.of Cells(Lipo):1-2S
Prop Disk Diameter:52.17mm
Center Thickness:5mm
Center Hole Inner diameter:1/1.5mm
3 Holes
Max Prop Width:8.94mm
Flight controller:(Frsky SPI RX version) CRAZYBEEX FR V1.0 FC Firmware target:CrazybeeF4FR
(Flysky SPI RX version) CRAZYBEEX FS V1.0 FC Firmware target:CrazybeeF4FS
(No receiver version) CRAZYBEEX PNP
V1.0 Firmware target:CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor:MPU-6000(SPI connection)
Board Size:28.5 * 28.5MM
Power Supply:1-2S Battery Input (DC 2.9V-8.7V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 Ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky Receiver or No Receiver
Built-in 5V 1A BEC
Built-in Voltage Detection
Onboard 4in1 ESC:MCU upgraded to EFM8BB21
Power Supply:1S LiPo/LiPo HV
Current:5A Continuous, Peak 6A (3 seconds)
Support BLHeliSuite Programmable
Factory Firmware:S_H_50_REV16_7.HEX
Default Protocol:DSHOT600
Onboard Frsky SPI D8 receiver Version:Compatible SPI BUS Receiver Frsky D8
Compatible Non EU transmitter D8 model
Failsafe Support
No Ground Interference ( Transmitter and receiver 1 m from the ground):100m~200m
Onboard Flysky SPI receiver Version:Compatible SPI BUS Receiver
Protocol:AFHDS and AFHDS-2A Switchable
Channels:8CH(AFHDS) or 14CH(AFHDS-2A)
Failsafe Support
No Gound Interference ( Transmitter and receiver 1 m from the ground):100~200m
No receiver version:Support sbus/ibus/spectrum/tbs crsf receiver
Onboard 5.8g VTX:Output Power:25mw
Input Voltage:3.3V 5.5V
Current Consumption:300mA(type)
Frequency:5.8GHz 5bands 40 channels
With Race Band
Smartaudio Ready
Caddx ANT lite 1200tvl Camera:Image Sensor:1/3′ CMOS Sensor
Horizontal Resolution1200 TVL
TV SystemNTSC/PAL switchable
Electronic ShutterPAL:1/50~100,000; NTSC:1/60~100,000
S/N Ratio >52dB (AGC OFF)
Video Output:CVBS
Min. Illumination0.001Lux@F1.2
Auto Gain Control:YES
WDR:Global WDR
Wide Power Input:DC 3.7-18V
Work Temperature:-20℃~+60℃
Work Humidity:20%~80%
Weight:1.5g (N.W.)
1. The Best worth 2S whoop PNP Kit in the market
2. 36gram 2s brushless 85mm whoop
3. New AIO 4in1 CrazybeeX flight controller
4. Smooth and powerful
5. CADDX ANT Lite Camera
Receiver Option
Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)
No internal receiver version
Package Included
1 X 85mm Frame
Option1:CrazybeeX FR V1.0 built-in internal Frsky SPI D8/D16 receiver
Option2:CrazybeeX FS V1.0 built-in internal Flysky SPI receiver
Option3:CrazybeeX PNP V1.0 no receiver version
4 X URUAV 1102 KV10000
1 X Gemfan toothpick 2023 Propellers(2cw+2ccw)
1 X Caddx Ant Lite 1200TVL Global WDR Nano FPV Camera
1 X 5.8G 25mw 40ch vtx (Flight controller built-in)

Weight 0.036 kg


There are no reviews yet.

Be the first to review “URUAV UZ85 85mm 2S DIY Whoop FPV Racing Drone PNP/BNF Caddx ANT Lite Cam AIO 4IN1 CrazybeeX FC 1102 10000KV Motor 5A ESC”

Customers Also Viewed