Realacc X210 4mm Frame + F3 6 DOF + 4X Racerstar BR2205 2600KV Motor + 4X RS20A V2 Blheli_S ESC + 7 Pairs KINGKONG/LDARC 5X4X3 Prop
Dear Customers,The KINGKONG will change its brand name to LDARC, the "LDARC" will replace "KINGKONG" to be showed on future products and advertising.Best regards,
|Realacc X210 FPV Racing Frame||Wheelbase: 214mm
Material: carbon fiber
3mm frame arm version: 72g (frame + hardware), 77g (with battery protector plate)
4mm frame arm version: 88g (frame + hardware), 93g (with battery protector plate)
|Full 3K Carbon Fiber frame.
4mm frame arms.
Dual purpose FPV and HD camera mounting solution.
Compact size for 5" propellers, 214mm motor to motor.
Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
"Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
Included power distribution board and XT-60 Pig-Tail to power ESCs and FPV flight electronics.
LiPo battery protection plate included.
Support to carry HD camera at 35 degree angle(such as the GoPro 4, Mobius, etc).
Lightweight and rigid
|F3 Flight Control Acro 6DOF||35x35mm board, 30mm mounting holes.
MPU6050 Accelerometers and Gyroscopes
4 x 4 pin JST-SH Socket (I2C, SWD, 2xuart)
2 x 8 pin JST-SH Socket (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
8 x 3 pin though-holes for pin headers for ESC / Servo connections.
2 x 4 pin though-holes for the 2x serial ports .
2 x 2 pin though-holes for battery voltage and buzzer.
|Racerstar Racing Edition BR2205 2600KV 2-4S Brushless Motor||RPM/V: 2600KV
Shaft diameter: M5
Motor mount hole size: M3
Weight: 28 grams
Battery: 2-4S lipo battery
Internal resistance: ?
Usage: for 250 260 280 Multirotor Frame Kit
|Racerstar RS20A V2 20A Blheli_S ESC||Model: RS20A V2
Input Voltage: 2-4S
Programming : YES
Net Weight: 5.67g
|Chips on EFM8BB21F16, 48MHZ Greatest .
BLHeli_S is designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation.
Small size combined with light weight for easy installation.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).
The input signal is automatically detected by the ESC upon power up.
All codes use damped light mode.Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling
The code supports features to prevent sync loss. There are tuneable parameters that can make the code run well even in the most demanding situations, although default settings will work
excellently in normal operating environments
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.
|7 Pairs Kingkong 5X4X3 5040 5 Inch 3-Blade Rainbow Colorful Propeller||Color: Red, Orange, YelloW, Green, Pink, Purple and Black
Quantity: 7 Pairs (One Pair Each Color)
Mounting Hole: 5mm
Size: 140*140*65 mm
1 x Realacc X210 carbon fiber frame kit
1 x Matek PDB-XT60 5V & 12V
1 x F3 Flight Control
2 x 8p Wire Rod
2 x 4p Extension Path
5 x Pins set
2 x BR2205 2600KV Brushless Motor CW
2 x BR2205 2600KV Brushless Motor CCW
4 x Racerstar RS20A V2 20A ESC
7 x 5040 CW Propellers
7 x 5040 CCW Propellers