iFlight TITAN Chimera7 LR 320mm SucceX-D F7 V2.1 50A BL_32 ESC 6S 7 inch Long Range FPV Racing Drone BNF w/ 2806.5 1300KV Motor DJI Air Unit HD Digital System

SKU: RC1749131

$848.99

Receiver BNF-DJI / Receiver TBS Crossfire Nano RX /

Shipping Fast to Chat with us online to see if the product is in stock before order:
WhatsApp us

Click here buy 2806.5 1800KV Speed Cruiser Motor Version
Click here buy Analog Version.
Introduction
iFlight 7 inch Long-Range Drone that can carry bigger batteries to get the flight time to surf the swiss alps if you want!
Super stiff frame for minimum resonance and 2806.5 motors for maximum 7inch prop control.
Fly big batteries top-mounted, or even bigger batteries bottom-mounted, 6cells recommended or 5cells for slow cruising.
GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included).
Vertical and horizontal TBS Crossfire antenna mounts included to cover you and your antenna dead ends.
Features
– 6mm rigid arm design for more stiffness
– Top- and bottom battery mount option
– XING 2806.5 efficient wide stator motors
– GPS pre-installed for more safety at distance
– TPU Bottom Stand for Gopro Camera (Camera and Camera Mount are NOT included)
– 360° TPU protection, DJI cam protection and antenna mounts
– DJI FPV Air Unit, buttery-smooth 720p120fps FPV feed (TPU soft mounted)
– No props in view (DJI Air unit record in 1080p/60fps)
– Battery voltage LED status light (illuminated IF logo on the bottom)
Specification
Brand Name:iFlight
Model:Chimera7
Item Name:320mm F7 6S 7 Inch Long Range FPV Racing Drone
Drone Wheelbase:320mm
Optional Receiver Version:BNF-DJI ( Built-in DJI Receiver)
TBS Crossfire Nano RX ( Built-in DJI Receiver & External TBS Crossfire Nano Receiver)
Weight:628.1 ( without Battery)
Flight Time:17-19 Mins ( Take Example as 6S 4500mAh Lipo)
Chimera7 320mm Frame Kit:Wheelbase:320mm
Main body dimension:258*199mm
Bottom to top distance:20mm
Arm thickness:6mm
Bottom plate thickness:3mm
Top plate thickness:2mm
Upper(middle) plate thickness:3mm
Camera plate thickness:3mm (included TPU inserts)
SucceX-D F7 V2.1 TwinG Flight Controller:MCU:216MHz STM32F722
Gyroscope:2x ICM20689
Barometer:YES
Blackbox:32MB
Betaflight OSD:YES
BEC:5V 2.5A / 9V 2.5A
Current sensor scale:100
Inverter for SBUS input (UART2-RX)
Smartaudio & Tramp VTX protocol supported
Beeper pad:Yes
RSSI input pad:No
UARTs:5
Motor outputs:8
8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
BLHeli32 Telemetry:RX5
Input voltage:recommended 2-6S, MAX 8S
Firmware Target:IFLIGHT_F722_TWING
Mounting pattern:30.5*30.5mm φ4mm with Grommets φ3mm
Dimensions:36x36mm
Weight:7.5g
USB type-C
SucceX 50A BLHeli_32 4in1 ESC:MCU:STM32F051
Up tp 48kHz PWM frequency
Capacitance:470uF/50V
Current Sensor:Yes
Input:2-6S LIPO
Constant:50A / Burst:60A
BlHeli32 telemetry:Yes
BEC:No
Supports up to Dshot1200, Proshot, Multishot
Target:iFlight-BL32-4IN1
Weight:14.4g
Size:43x39mm (including the power pads)
Mounting Hole:30.5×30.5mm/Φ3mm
XING 2806.5 1300KV Motor:Voltage:2-6S
KV:1300KV
Configuration:12N14P
Bearing:NMB 11*5*5
Stator Diameter:28
Stator Length:6.5mm
Shaft Diameter:M5
No.of Cells(Lipo):2-6S
Weight:49.5g(with a short cable)
Motor mount hole:19×19 φ3mm
Gemfan 7040 3-Blade Propeller:Quantity:2 CW & 2 CCW
Color may vary
DJI Air Unit HD Digital System & Camera:Weight :Air Unit (Camera included):45.8 g / 3.9 g (MMCX elbow each)
Dimensions
Air Unit:44 x 37.8 x 14.4 mm
Camera:27.4 x 21.1 x 20.1 mm
Coaxial Cable:100 mm
Optional Receiver Version:BNF-DJI Version:Built-in DJI Receiver ( On DJI Air Unit Module);
this version is compatible with DJI Remote Controller.
TBS Crossfire Nano RX Version:Built-in DJI Receiver and has a external TBS Crossfire Nano RX;
this version is compatible with DJI Remote Controller and Official TBS Radio Transmitter
Lipo Battery ( NOT Included):Recommend 5S 3000mAh above (slow cruising) or 6S 2500mAh above
Package Included
1x Chimera7 Drone
1x TPU bottom stand incl. lock screw ( for Installing TPU Camera Mount)
1x DJI FPV Camera ( Built Well on Drone)
1x DJI FPV Air Unit Module ( Built Well on Drone)
2x 5.8G Albatross RP-SMA Antenna LHCP 150mm
2x Gemfan 7040 Propeller CW
2x Gemfan 7040 Propeller CCW
4x 20x250mm PU Leather Battery Strap (Color May Vary)

Weight 1 kg

Reviews

There are no reviews yet.

Be the first to review “iFlight TITAN Chimera7 LR 320mm SucceX-D F7 V2.1 50A BL_32 ESC 6S 7 inch Long Range FPV Racing Drone BNF w/ 2806.5 1300KV Motor DJI Air Unit HD Digital System”

Customers Also Viewed