Happymodel Snapper7 75mm Crazybee F3 OSD 5A BL_S ESC 1S Brushless Whoop FPV Racing Drone BNF

SKU: RC1266612

$169.89

Out of stock

Ship From:China
Dispatch:Ship between 2 bussiness days
Payment Methods:Paypal & Credit Cards and more >Buyer Protection:
Full Refund ,If you do not receive your order
Full or Partial Refund , If the item is not as described more >payment

Share:
Size

Recommended for You

Description

Happymodel Snapper7 75mm Crazybee F3 OSD 5A BL_S ESC 1S Brushless Whoop FPV Racing Drone BNF
Notice: FrSky LBT EU Firmware D16 Transmitter can not compatible with FrSky version drone.
You can change your transmitter to LBT EU Firmware D8 version or International version.
Specification: ( DSMX/ DSM2 Version Manual )
Brand Name: Happymodel
Model: Snapper7
Item Name: 75mm Wheelbase 1S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm
Version: Basic Version / Standard Version ( Optional)
– The diffirence of them are the package lipo battery and charger
Receiver: Compatible Frsky D8 Receiver OR
Compatible Flysky AFHDS/ AFHDS-2A Receiver ( Optional)
Size: 98.5mm*98.5mm*36mm
Weight: 28g (without battery)
Take off weight: 41.8g (with battery)

Crazybee F3 Flight Controller Item Name: Crazybee F3 FC
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000 (SPI connection)
Power supply: 1S battery input (DC 3.5-4.35V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Frsky receiver Or Flysky Receiver
Built-in Betaflight OSD(SPI Controll)
Built-in Current meter (Max 14A,could be modified to 28A by replace resistor)
Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through ReadyFirmware: Betaflight_3.3.0_Crazybee
Board size: 28.5 * 28.5MM
Board weight: 3.5 g
Heading LED Ready
Onboard 5A 4 In 1 ESC Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Motor connector: JST PH1.25 3pin
Signal Support: Dshot150/Dshot300/Dshot600/Oneshot125/Multishot/PWM
Onboard Frsky Receiver Version ( Optional) SPI BUS receiver
Frsky D8
Compatible both of Non EU and EU LBT transmitter
Channels: 8CH
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground) : 300m
Onboaed Flysky Receiver Version ( Optional) SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch (AFHDS) or 14ch (AFHDS-2A)
No ground interference (Transmitter and receiver 1 m from the ground): 300m
Failsafe support
0802 19000KV Motor Model: 0802
KV: 19000KV
Configu-ration: 9N12P
Stator Diamter: 7mm
Stator Length: 3mm
Shaft Diameter: Φ1.0
Motor Dimension (Dia.*Len) : Φ10*14.5
Weight: 2.5g
No.of Cells: 1S Lipo
Propeller 40mm 3-blade Propeller ( 4 CW + 4 CCW)
5.8G VTX AIO Camera 5.8G 48CH 25mW VTX
Output Power: 25mW
Frequency: 48CH
With Raceband: 5474-5945 MHZ
Input Voltage: 3.3V-5.5V
Current Consumption: 300mA (type)
700TVL Camera
Camera Resolution: 700TVL
Field of View: 120°
Video Format: NTSC
Antenna: RG178 antenna
Size: 13.9×12.0mm( LxW)
Weight: 3g
3.8V 450mAh Lipo Battery Capacity: 450mAh
Voltage: 3.8V
Continuous Discharge Rate: 30C
Instantaneous Discharge Rate: 60C
Size: 60x18x7mm
Weight: 13.6g
Connector: PH2.0

Features:
– Betaflight support, multi flight mode: ACRO/AIR/ANGLE
– Powerful Brushless motor and Smooth ESC
– CNC aluminum alloy propeller guard
– Betaflight OSD support, easy to get RSSI, Voltage and other info from your goggles
– Adjust the settings and the PID of the flight controller via OSD
– Frsky version support both EU LBT and NON-EU Frsky transmitter
– Full telemetry function ready
– Head lights ready
– Camera angle adjustable
– Real Bind and Fly version
Package Inlcuded:
Basic Version
1x Snapper7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
1x 3.8v 450mah 30C/60C Lipo battery
1x USB Lipo/LIHV Charger

1x Propeller Disassemble Tool
1x Screwdriver
Standard Version
1x Snapper7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
3x 3.8v 450mah 30C/60C Lipo Battery
1x 1S06 6 Way Lipo/LIHV charger

1x Propeller Disassemble Tool
1x Screwdrive

Order Note:Order this product,please provid the option as follows to order notes on checkout page.
Receiver Compatible Flysky Receiver Mode standard (+US$10.00)/Receiver Compatible Flysky Receiver Mode Basic Version/Receiver Compatible Frsky Receiver Mode standard (+US$10.00)/Receiver Compatible Frsky Receiver Mode Basic Version/Receiver Compatible DSM2/DSMX Receiver Mode standard (+US$10.00)/Receiver Compatible DSM2/DSMX Receiver Mode Basic Version/

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Payment Methods:


1.Paypal
paypal

2.Credit Cards
payment
Know more payment methods,[click here]!

Shipping Methods:


shipping-methods
When you place your order at rcbuying,we will choose the right shipping mothods to ship the package to you,such as EMS,DHL,UPS,Fedex,China airpost and others,know more [click here]
If you need to wholesale the items,just email to us the follow info:
Product SKU:
Order Quantity:
Your Target Price($):
Country:
Your Name:
Your Telphone Number:
Your Email:(important)
Our wholesale contact email:support@hobbyant.com

New Arrivals