rc-airplanes-RocHobby 3D MXS 1100mm EPO RC Airplane PNP-RocHobby 3D MXS

RocHobby 3D MXS 1100mm EPO RC Airplane PNP

Brand Name: RocHobby(from FMS)
Item Name: MXS 3D
Wingspan: 1100mm/43.3in
Overall Length:1080mm/42.5in
Material: Durable EPO
Flying Weight: 1050g/37.1oz
Motor Size: 3536/KV1250
Recommended Radio: 4 Channel
Servo:9g digital metal servoX 4
Propeller Size: 11 x 5.5 in 2 blade
Recommended Battery: 11.1V 2200 mAh 35C
CG: 70-80mm(From Leading Edge)
Experience Level Intemediate
Wing Load:34g/dm2
Wing Area: 30.8dm2
Requires: PNP requires Radio System, Battery and Charger

– Easy to assemble glueless design
– new hollow wing design for reduced weight and rigidity
– Wing tip side force generators for superior knife edge and low maneuvering
– Wing and tail remove for transport,however 1100mm size makes transport easy
– Ultra visible yellow and black high contrast saint scheme
– Super stong laminated control surface hinges
– Powerful 25-36 1250kv outrunner motor, 4 digital metal gear servos and 40amp ESC

NOTE: Don’t use a lipo battery more than 14.8v/4S (included 4S) if your airplane are using the original configuration,otherwise the motor and ESC may be damaged due to the power boost.

Package included:
1 x RocHobby 3D MXS PNP

Leave a Reply