30.5×30.5mm Holybro KAKUTE H7 V1.3 Tekko32 F4 4in1 50A ESC Stack Flight Controller 5V 9V BEC / Atlatl HV V2 0.5/ 25/ 200/ 500/ 800mW VTX for RC Drone FPV Racing
Specification:
Brand: Holybro
Model: KAKUTE H7 V1.3 Tekko32 F4 4in1 50A ESC Stack
Optional Version: NO VTX / With VTX
| Kakute H7 V1.3 ( Manual) |
MCU: STM32H743 32-bit processor running at 480 MHz IMU: MPU6000 Barometer: BMP280 OSD: AT7456E Onboard Bluetooth chip: ESP32-C3 SpeedyBee IOS & Android App Compatible Note: The Bluetooth onboard is set to automatically turn off when the flight controller is unlocked (arm) , and turn on automatically when the flight controller is locked (disarm). 6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry) 9x PWM Outputs (8 Motor Output, 1 LED) 2x JST-SH1.0 8pin ESC port (4in1 ESCs, x8/Octocopter compatible) 1x JST-SH1.0 6pin VTX port (For HD System like Caddx Vista & Air Unit) Battery input voltage: 7V to 42V BEC 5V 2A Cont. BEC 9V 3A Cont USB Type-C Mounting: 30.5 x 30.5mm/??4mm hole with ??3mm Grommets Dimension: 35x35mm Weight: 8g Firmware: BetaFlight: KakuteH7 (v4.2.11 and above) INAV: KakuteH7 (4.0.0 & above) SD card support added in 4.1.0. ArduPilot: KakuteH7 (4.2.0 & above) |
| Tekko32 F4 4in1 50A ESC ( Pin Cable) |
Continuous Current: 50 Ax4 Burst Current: 60 Ax4 Supports 4-6S battery Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc. ESC telemetry Supported Onboard analog current sensor No output BEC BLHeli_32 firmware 1000uf 35v capacitor included (highly recommended for 6s setup) Amperage meter scale ratio: 120 (V1.9 Version) Dimensions: 48x37x6mm / Weight: 13.8g Mounting holes: M4 30.5×30.5mm (M3 grommets included) Features: New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz) PWM Frequency: 16k to 96k Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit. |
| NO VTX Version | without VTX Module |
| With VTX Version ( Manual) |
Model: Atlatl HV V2 VTX Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW Audio: 6.5 MHz Mono Protocolsmart audio2.0 Antenn AConnector: MMCX Input Voltage: 7 to 28 volts (2-6S LiPo) with absolute maximum 42 volts Dimensions: 35x25x7mm (Includes USB height) Mounting Holes: Standard 30.5mm square to center of holes Weight: 9.3g ( VTX Table Link ) |
Package Included:
| NO VTX Version | 1x Kakute H7 v1.3 FC 1x Tekko32 F4 4in1 50A ESC 1x Electrolytic capacito: 1000uF 35v 1x 8pin to 8pin 1mm pitch 65mm cable 1x 8pin to 8pin 1mm pitch 25mm cable 1x JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System) 1x JST SH 6pin 100mm cable(for Caddx HD Systems) |
| with VTX Version | 1x Kakute H7 v1.3 FC 1x Tekko32 F4 4in1 50A ESC 1x Atlatl HV V2 VTX 1x Electrolytic capacito: 1000uF 35v 1x 8pin to 8pin 1mm pitch 65mm cable 1x 8pin to 8pin 1mm pitch 25mm cable 1x JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System) 1x JST SH 6pin 100mm cable(for Caddx HD Systems) 1x 80mm SMA?CMMCX Cable 1x JST GHR 4pin 150mm cable |
Harmony -
I received the product and was pleasantly surprised to find an extra little gift included.
Bnd8eTer2 -
If I could give it more stars, I would.
Eloise -
I feel lucky to have found this product. It's a gem!
m7V -
The quality of this product is truly outstanding.
A65xYWtd0P -
This product, 30.5×30.5mm Holybro KAKUTE H7 V1.3 Tekko32 F4 4in1 50A ESC Stack Flight Controller 5V 9V BEC / Atlatl HV V2 0.5/ 25/ 200/ 500/ 800mW VTX for RC Drone FPV Racing, has exceeded my wildest expectations.
10EAlI -
I'm content with the product, despite the shipping delay.
Maureen -
These products are a reasonable choice, considering I have 1.
if7wEkjD -
30.5×30.5mm Holybro KAKUTE H7 V1.3 Tekko32 F4 4in1 50A ESC Stack Flight Controller 5V 9V BEC / Atlatl HV V2 0.5/ 25/ 200/ 500/ 800mW VTX for RC Drone FPV Racing is my new favorite thing. It's incredible!
Mountain -
The product meets my expectations, despite the slow shipping.
g6an -
RCBuying is my ultimate choice for finding exceptional products.
Erin -
This product has become a part of my daily routine.
Kimball -
I ordered, and it felt like the product appeared instantly. So delighted!
Flourishing -
RCBuying deserves a standing ovation for offering such an amazing deal on this product.
3zwEOd6sfW -
For the price, you can't expect much more from 1 products.
6Mj -
This product is worth every penny. Great investment!
rHiJ -
I can't get enough of 30.5×30.5mm Holybro KAKUTE H7 V1.3 Tekko32 F4 4in1 50A ESC Stack Flight Controller 5V 9V BEC / Atlatl HV V2 0.5/ 25/ 200/ 500/ 800mW VTX for RC Drone FPV Racing. It's fantastic!
tAW -
Quick shipping, and the product quality is exceptional.