Holybro SiK Telemetry Radio V3 100mW 433MHz / 915MHz Open Source SiK firmware Plug-n-play for Pixhawk Standard Flight Controllers
Overview:
This Holybro SiK Telemetry Radio is a small, light and inexpensive open source radio platform that typically allows ranges of better than 300m ‘out of the box’ (the range can be extended to several kilometres with the use of a patch antenna on the ground).
This radio is plug-n-play all Pixhawk Standard and other Flight Controller, providing the easiest ways to setup a telemetry connection between your Autopilot and a ground station. It uses open source firmware which has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Ardupilot, QGroundControl, PX4 Autopilot.
The radios can be either 915Mhz or 433Mhz and you should purchase the model which is appropriate for your country/region.
Note:
This new batch of SiK Telemetry Radio V3 does not support firmware upload via Mission Planner 1.3.75 or older. Please use Mission Planner 1.3.75.1 or newer if firmware upload is needed. QGroundControl does not support firmware upgrade for this new batch of SiK Telemetry Radio V3 at this moment.
Features:
1. Open-source SIK firmware
2. Plug-n-play for Pixhawk Standard Flight Controllers
3. Easiest way to connect your Autopilot and Ground Station
4. Interchangeable air and ground radio
5. Micro-USB port (Type-C Adapter Cable Included)
6. 6-position JST-GH connector
Specification:
Brand Name: Holybro
Item Name: SiK Telemetry Radio V3
Power: 100 mW maximum output power (adjustable) -117 dBm receive sensitivity
Connector: RP-SMA
2-way full-duplex communication through adaptive TDM UART interface
Transparent serial link
MAVLink protocol framing
Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle
Error correction corrects up to 25% of bit errors Open-source SIK firmware
Configurable through Mission Planner & APM Planner
FT230X is a USB to BASIC UART IC
Dimensions:
28 x 53 x 10.7mm (without antenna)
Electrical Data:
Supply Voltage: 5V DC (from USB or JST-GH)
Transmit Current: 100 mA at 20dBm
Receive Current: 25 mA
Serial Interface: 3.3 V UART
Quick Start Guide, Click Here
Package Included:
2x Radio modules with antennas
1x Micro-USB to USB-A cable
1x Micro-USB to Micro-USB OTG adapter cable
1x Micro USB to Type C Adapter
1x JST-GH-6P to JST-GH-6P cable (for Pixhawk Standard FC)
JST-GH-6P to Molex DF13 6P (for Pix32, Pixhawk 2.4.6, etc.)
Isaac -
I felt like a valued customer when I found the unexpected coupon in the package.
Willa -
For the cost, these 7 products are a good deal.
pCo4NF -
The logistics delay was a minor issue, and the product is satisfactory.
lcrd9SF -
I felt truly valued as a customer when I received the surprise coupon.
w7OKRol2 -
The product was a bit complex for me, but the responsive customer service team simplified everything.
Phineas -
I'm pleasantly surprised by the quality of this FPV Parts product!
Tabitha -
The product arrived in record time! I'm so impressed!
D8K -
I had my doubts, but RCBuying proved to be the smartest choice after extensive price research.
Kathleen -
Quick shipping, and the product quality is exceptional.
zcFnmm -
This product from RCBuying has exceeded all my hopes and expectations.
Dragon -
Initially, I was confused about the product's features, but the customer support clarified everything.
dGfUdWIzeX -
The product arrived in record time! I'm ecstatic!
1p5E5rkAN -
Despite the shipping hiccup, the product quality is decent.
ykyfj08Ls -
Initially, I was hesitant about the product, but the customer service staff reassured me.
LGJW07n -
This is a game-changer. So glad I bought it!
jnJ3bDLa -
I'm a happy customer because of this fantastic FPV Parts product.
Nursing -
The bonus gift was a thoughtful gesture that left a lasting impression.
Jeffrey -
The product was a bit intimidating at first, but the patient and knowledgeable customer support made it manageable.
Farrah -
I had some initial struggles with the product, but the customer support team's expertise was invaluable.
Trixie -
I'm so glad I stumbled upon this product.
hDhnsP2JX -
This product has become an essential part of my life.
jI9RgeAos -
The logistics delay was a minor issue, and the product is satisfactory.
AY0y170k6 -
These products are suitable for the price I paid.
AOim -
Thank you, RCBuying, for always providing great products!
M9X2Ggo -
I've been using this product for a while now and it's fantastic.
rHiJ -
The quality of Holybro SiK Telemetry Radio V3 100mW 433MHz / 915MHz Open Source SiK firmware Plug-n-play for Pixhawk Standard Flight Controllers is unmatched. Impressive!
Sean -
I'm thrilled with my purchase of this FPV Parts product.
Frank -
I'm satisfied with my order of 3 products.
Jocelyn -
This is the best purchase I've made in a long time. It's Holybro SiK Telemetry Radio V3 100mW 433MHz / 915MHz Open Source SiK firmware Plug-n-play for Pixhawk Standard Flight Controllers!
Gifford -
The product arrived before I even expected it. Excellent!